Is it time to have your area rug professionally cleaned? Become familiar with rug cleaning and you’ll be able to restore any of your floor coverings to their former glory at any time. With all of the foot traffic, pets, and spills, an area rug can take a battering. To thoroughly clean a room, you must know how to do it yourself—and that’s where the knowledge comes in helpful.
No need to clean rugs at regular intervals. To avoid this, you should only clean rugs if they are clearly unclean or if they have an unpleasant smell. Learn how you may spruce up old area rugs and get them looking like they did when you initially laid them out.
Start By Gathering All Of The Necessary Equipment And Supplies
For an effective rug cleaning, you’ll need the following supplies on hand:
- Carpet cleaning (or mild dish soap)
- Bucket
- A sponge or a brush with a soft bristle
- Water
Optional:
- Hand protection made from rubber
- Hose for the garden
- Wet and dry vacuum cleaner
Clean Up The Mess
Use a vacuum cleaner to thoroughly clean both sides of the rug. You’ll want to remove every last piece of trash. Use the brush attachment to remove any remaining stray hairs if you have pets.
The Next Step Is To Combine All Of Your Cleaning Products Into One Solution
You can use a rug shampoo like this one from Bissell as the cleaning agent. Whatever shampoo you choose, make sure you combine it according to the manufacturer’s instructions (found on the package).
Perform A Color Test
Check to see if the cleaner will cause the colors to run before you begin scrubbing. To ensure colorfastness, apply the solution to a small area of the rug. If there is no bleeding, you can proceed to the following step.
Rinse The Carpet
Work the cleaning solution into lather on the carpeting using a sponge or soft-bristle brush. For five minutes before you begin to rinse your rug, allow the cleaner to sit on the surface of the rug. If you use anything less, you’ll be undermining the cleaning process.
Rinse The Rug
Rinse the rug thoroughly under running water to remove any soap residue. Runoff water should be pure and devoid of any cleaning solution residue, as well as free of any odors.
Removing Excessive Water
The rug will dry more quickly if you can remove as much water as possible from it now. A wet-dry vacuum or a squeegee in the direction of the nap can be used if you have one.
Allow The Rug To Dry
Once you’ve cleaned the rug, it’s time to let it dry. Allow the top of the rug to thoroughly dry before laying it out on a flat surface. After that, turn it over and allow the underside to dry. In order to expedite the procedure, fans can help.
Clean The Rug With A Vacuum Or A Brush
Threads and fibers might become crushed and squeezed during the cleaning procedure. Vacuum or brush them with a soft-bristled brush to bring them back to life. Your freshly cleaned carpet is now ready for you to enjoy. If you’ve learned how to clean an area rug, you can do it whenever you want.
Our company offers many varieties of rugs including custom logo rugs so that you can buy them quickly.